Strona główna » Shop » ZP EPOXY PAINT

ZP EPOXY PAINT

32.6265.44

ZP EPOXY PAINT is a two-component, water-based epoxy paint for painting various mineral and ceramic surfaces to protect them against wear, abrasion, dirt and aggressive chemicals, i.e. solvents, cleaning agents. The paint has very good adhesion to ceramic, concrete and steel substrates and high abrasion resistance. After drying, it forms a durable, hard coating with a satin finish. When exposed to UV radiation, ZP EPOXY PAINT may turn slightly yellow over a long period of time; in order to fully reduce the effect of color change it should be covered with ZP EPOXY PAINT.

SKU: N/A Category: Tags: , ,

ZP EPOXY PAINT

ZP EPOXY PAINT is a two-component, water-based mixture designed for painting mineral and ceramic surfaces, providing them with protection against wear, abrasion, dirt and aggressive chemicals such as solvents and cleaning agents. The paint is characterised by high adhesion to ceramic, concrete and steel substrates, as well as abrasion resistance. When dry, it forms a durable, hard coating with a satin finish. Please note that the paint may yellow slightly after prolonged exposure to UV light. In order to prevent color change, it is recommended to coat the ZP EPOXY PAINT with ZP EPOXY LACQUER.

Advantages

ZP EPOXY PAINT is a product that has many advantages and is ideal for a variety of applications. It is a highly abrasion-resistant, washable, chemical-resistant and water-repellent paint. It can be used both on walls and floors. The epoxy paint also has good covering properties and high adhesion to various substrates, including ceramic. It does not run off vertical surfaces, which is important when painting walls. The product is suitable for use both indoors and outdoors, on dry and damp substrates. The epoxy paint is ready to use after mixing the two components and can be applied by brush, roller or spray.

Summary of the advantages of ZP EPOXY PAINT:

  • highly abrasion-resistant
  • washable
  • resistant to chemicals
  • resistant to contact with water
  • can be applied to walls and floors
  • good covering properties
  • high adhesion to various substrates, including ceramics
  • does not run off vertical surfaces
  • for indoor and outdoor use
  • for dry and damp substrates
  • ready to use after mixing the two components
  • to be applied by brush or roller, also spraying

See other products for the bathroom or kitchen.

If you have questions, call our hotline.

Weight N/A
Dimensions N/A
Weight

2 kg, 7 kg

Colour

RAL 9016 (white), RAL 7040 (grey), RAL 7024 (graphite)

Application

  • painting of wall tiles,
  • painting of floor tiles,
  • outdoor use possible with UV-resistant varnish,
  • painting of concrete floors, stairs,
  • painting of floors exposed to mechanical and chemical loads, i.e. floors in production halls, warehouses, garages, workshops, where pedestrian and vehicular traffic takes place (applies to fork-lift trucks on rubber wheels),
  • protective and decorative protection of balcony slabs,
  • making horizontal and vertical markings on traffic routes,
  • painting of sealed monolithic ponds.

Technical data

  • consumption: approx. 0,4 kg/m²
  • time between application of individual layers: approx. 12 h
  • recommended number of coats: minimum 2
  • consumption time: approx. 45 minutes
  • air and substrate temperature during application: from 5°C to 30°C
  • drying time: max 24 h
  • available in 3 RAL colours: RAL 9016 (white), RAL 7040 (grey), RAL 7024 (graphite)
  • shelf life: 12 months
  • packaging: 2 kg; 7 kg.

Directions for use

Substrate preparation

The substrate should be sound, dry or damp, even (without cavities or cracks) and free of impurities, i.e.: oils, cement milk, dust, old coatings and any signs of biological aggression. Ceramic cladding should be thoroughly degreased and then washed. Loose joints and silicone should be removed, missing joints should be filled prior to paint application.

Application

Combine the two paint components together by stirring with a slow speed mixer until a uniform colour and consistency is achieved. Due to the difference in viscosity of the two components, it is recommended that the ingredients are carefully taken from the packs and mixed. Poor mixing of the hardener with the paint base can result in poor adhesion, a dull finish, a sticky film and blistering.

After mixing the two components, wait 5 minutes for the mixture to vent. When applying to porous substrates, the first coat should be diluted with a maximum of 10% water.

The product should be applied to the prepared substrate by brush, roller or spray in a minimum of two working operations. The second coat should be applied after approximately 12 h, crosswise to the first coat.

Surfaces coated with ZP EPOXY PAINT should be protected from water until completely dry.

The coating reaches full mechanical resistance after a minimum of 3 days and chemical resistance after a minimum of 7 days.

When using the coating outdoors, ZP LACQUER should be applied to the coating to protect the color from UV rays. Apply the varnish 24 hours after the second coat of paint has been applied.

Notes

  • the product contains water – do not store or use below 5°C
  • wear protective clothing, goggles and gloves when working
  • store in original sealed packaging, in a cool and dry place
  • protect from direct sunlight
  • clean tools with water immediately after use
  • carry out the work in accordance with the rules of the trade, the standards and the relevant health and safety regulations.
Shopping Cart
Scroll to Top