Strona główna » Shop » ZP PRIMER

ZP PRIMER

1.70

ZP PRIMER is an aqueous solution of a fine-particle acrylic dispersion for deep penetration of primed substrates. The product is designed for application to absorbent and porous substrates both indoors and outdoors. Effectively reduces the absorbency of the substrate while unifying the parameters of the entire primed surface. It regulates the absorbency of the substrate and reduces paint consumption. Does not contain organic solvents.

Availability: 100 in stock

ZP PRIMER

ZP PRIMER is a deeply penetrating water-based acrylic dispersion solution with a fine particle structure. This preparation is designed for application to absorbent and porous surfaces, both indoors and outdoors. It reduces the absorbency of the substrate and evens out its parameters. In addition, it regulates the absorbency of the substrate and reduces paint consumption. It is worth mentioning that the preparation does not contain organic solvents.

Advantages

ZP PRIMER is a preparation that strengthens and binds commonly used building substrates. Above all, it reduces and evens out the absorbency of the substrate and the adhesion of subsequent layers. By using the primer, the consumption of interior and facade paints can be reduced and substrates can be strengthened. The product is vapour-permeable and does not run off vertical surfaces, which makes it easier to apply. It can be used both indoors and outdoors, on dry and damp substrates. The preparation can be applied by brush, roller or even spray.

Summary of advantages of ZP PRIMER:

  • reduces and evens out the absorbency of building substrates
  • increases scratch resistance of the substrate
  • increases the adhesion of subsequent layers
  • protects the substrate from the harmful effects of moisture
  • reduces the consumption of interior and facade paints
  • reinforces substrates
  • vapor-permeable
  • does not run off vertical surfaces
  • for indoor and outdoor use
  • for dry and damp substrates
  • for application by brush or roller
  • can also be applied by spraying

See other products in the polymeric waterproofing category.

Weight 1.1 kg
Dimensions 8.1 × 24.1 cm

Application

  • priming of absorbent and porous substrates (concrete, cellular concrete, gypsum blocks, plaster boards, gypsum, lime and cement-lime plaster, cement and anhydrite screeds)
  • priming of substrates for paints, wallpaper, flooring, putty, tile adhesives
  • protective coating for spouts, facilitates maintenance and prevents dust deposition
  • an additive to adhesive mortars to improve their mechanical strength.

Technical data

  • consumption: approx. 0.10 – 0.20 l/m²2
  • drying time: approx. 1 – 2 h (depending on absorbency of the substrate)
  • recommended number of layers: 1-3
  • application by brush, roller or spraying
  • air and substrate temperature during application: from 50°C to 300°C
  • shelf life: 12 months
  • packaging: 1 l

Directions for use

Substrate preparation

The substrate should be stable, dry or dull, even (without cavities or cracks) and free from contamination, i.e. oil, cement laitance, old coatings and any signs of biological aggression. Dirt and layers with poor adhesion should be removed and replenished with a suitable material.

Application

Mix the contents thoroughly after opening the container. Then apply undiluted to the substrate with a roller or brush as a thin and even layer. Highly absorbent substrates should be primed 2 – 3 times using the wet-on-wet method. For the first coat, the primer can be diluted with water at a ratio of 2:1. The primed surface is ready for further work after a drying time of about 2 hours at a temperature of +200°C. Close the container tightly after completion of the work.

Notes

  • product contains water – do not store or use at temperatures below 50°C
  • protective clothing, goggles and gloves should be worn at work
  • store in original sealed packaging, in a cool and dry place
  • protect from direct sunlight
  • clean tools with water
  • carry out the work in accordance with the rules of the trade, the standards and the relevant health and safety regulations.

Product technical sheet

Product technical sheet

Shopping Cart
Scroll to Top